HP Procurve 2650 pwr
From Bobs Projects
Hewlett-Packard Procurve 2650_pwr is an Ethernet switch with 48 ports operating at 10/100Mbps and offering IEEE802.3af-2003 Power-over-Ethernet (PoE), as well as two ports operating at 1Gbps each.
Contents |
Some Tips
Resetting to Factory Default
- Press both "Reset" and "Clear" (hidden) buttons together.
- Release "Reset"
- When "Test" LED starts blinking, release "Clear"
Switch should now DHCP Request an IP address on the default (untagged) VLAN
Setting Time Protocol
Select SNTP and point at NTP server on same subnet.